Oxford Hitachi X-MET5000 Handheld Xrf Analyzer
HITACHI
At the pull of a trigger, the X-MET5000 and X-MET5100 X-ray fluorescence (XRF) analysers provide fast, highly accurate, on-the-spot sample screening and analysis. The need for expensive laboratory testing is minimal. X-MET enables GPS integration for real-time correlation of measurement data and location coordinates. Fast and reliable Go/No-Go decisions, and fully configurable Pass or Fail alarms. Analyze any sample type, including soil, rock, dirt, humus, sand, powder, liquid etc.
£1,469.19
Rugged and reliable tool for fast analysis
Withstands all weather conditions and rough treatment
IP54 (NEMA 3) approved. Superior dust and moisture protection
High-strength environmentally sealed housing
Long battery operating time, charge indicator on battery and user interface
High performance
Fast, single-shot heavy element analysis: Pb, As, Cr, Cu, Zn, Ni, Cd, Co, Se, Mo, Hg, Sb, Ag, Ba etc.
Al, Si, P, S analysis of prepared samples. No need for vacuum or He attachments! (X-MET5100)
Fast measurement time: 30 – 120 seconds (X-MET5000) or 5 – 30 seconds (X-MET5100), depending on the elements of interest and required precision
Low detection limits, X-MET5000 can typically detect 5 – 30 ppm concentration with a 120s measurement time. X-MET5100 detection limits are even lower and ppm level analysis can be achieved in just 10 – 30 seconds Splash and dust proof cover Oxford Instruments
Measures all 26 elements defined in EPA6200 • High speed automatic averaging: Calculates averages of 2 – 50 measurements and saves individual results and averaged results
Easy and reliable
Short learning curve
User interface in >10 languages
Easy data storage and reporting
PDA based technology for flexibility
CE, cCSAus certified
Bench-Top Stand and portable sample bag adapter
Improved precision
Lower detection limits
Optimized accuracy
Operator-selectable, comfortable location
Specifications
Analyzer
Hand-held EDXRF Analyzer
Oxford Instruments Silicon Drift (SDD) high resolution detector
45 kV Rh target X-ray tube (max 50uA)
Automatic 5-position filter changer
Measurement spot size 9 mm
Operating temperature: -10 °C to +50 °C
Computer
HP PDA with Windows Mobile 5.0 OS
128 MB Internal memory
Min. 1 GB Removable memory
Capable of holding > 100,000 results and spectra
Data transfer via supplied USB cable; IR; WiFi, Bluetooth
Touch-screen controlled graphical user interface (12 languages)
Calibrations
Fundamental parameter (FP) and empirical factory calibrations available for various applications: Metals, plastics, soil, solder, mining, precious metals etc.
Customer specific calibrations
Analytical range
From Mg to U, up to 35 elements depending on calibration
Radiation Safety
Password protection
IR proximity sensor
Three failsafe warning lights
Batteries
Rechargeable, removable inside handle
Li-Ion batteries (Quantity 2)
Typical duty cycle: 6 hours of operation each. Continuous (tube on) measurement: 3-4h.
110/230V 50/60 Hz battery charger, including AC adaptor.
Reliability
CE and cCSAus approved
IP54 (NEMA 3) Splash/dust proof
Dimensions
9 x 30 x 27 cm
Weight
1.7 kg with battery and PDA installed
INCLUDED
Oxford X-MET5000 handheld analyzer
Battery for X-MET5000
9 pieces check Sample plates
Background plate
Pretec multi-card reader
2 GB SD card
IPAQ PDA computer with stylus
PDA AC Adapter plug
AC adapter/Battery charger
Dock for X-met 5000
PDA USB /RS232 cable HP
(2) Kapton window kit
XLCS 2608 Li-ion Charger for X-MET 5000
User Manual
Calibration certificate
Hard carrying case
30-day money back guarantee
- Availability: 11 In Stock
- Model: X-MET5000
-
Brand:
Reviews
Write a Review
Brands List
